The Problem
These clients contacted us because a blackberry patch on the back of their property had grown very large over the years, and they wanted to use that land again.
The challenge on this project was what the patch concealed. Fences, posts and miscellaneous debris were buried within it and could not be seen until you were right on top of them.
Choosing the Right Machine
On a typical blackberry patch, we would use a skid steer with a brush hog. With fences, posts and unknown debris hidden in the brush, however, driving a skid steer through it could have damaged the fences, the equipment or anything else buried inside.
Instead, we used an excavator with a brush cutting head. The cutter works from the end of the excavator arm, which allowed us to reach into the patch, identify hidden obstacles as the brush came down, and cut carefully around fences and posts without driving over them.

Clearing the Patch
We cleared the entire patch, then continued along the property line toward the house and cleared around the shop and other accessible areas.

The Result
The owners regained a large area of usable land, with clear access along the property line and around the shop.
AfterEquipment Used
An excavator with a brush cutting head, hauled in on a trailer.
What a Project Like This Costs
Typical range
$5,000 – $10,000
Large blackberry patch clearing jobs like this one, with hidden fences and debris to work around, usually fall in this range.
What affects the cost
Every property is different, so the cost of similar projects can vary. The main factors are:
- Size and density of the patch. Larger, more mature patches take longer to cut down.
- Hidden obstacles. Fences, posts and debris inside the brush require slower, more careful cutting.
- Equipment required. When obstacles rule out a skid steer and brush hog, an excavator with a brush cutting head is used, which takes more time.
- Site access. Gates, fences, slopes and buildings can limit where equipment can reach.
- Ground conditions. Soft or wet ground can slow equipment down.
Planning a similar project? We're happy to talk through what you have in mind and give you a free estimate.
Common Questions
Should I use a brush hog or an excavator brush cutter for blackberries?
A skid steer with a brush hog is usually the fastest option for an open patch. When fences, posts or debris are hidden in the brush, an excavator with a brush cutting head is the safer choice, because it cuts from the end of the arm and can work around obstacles without driving over them.
What can be hidden inside an old blackberry patch?
Old patches often hide fences, posts, wire and random debris that you can't see until you're right on top of them. That's why we clear carefully and choose the equipment based on what's in the patch.
Will blackberries grow back after they are cut?
Yes, they can. Blackberries regrow from the root crowns left in the ground, so regular brush cutting is what keeps them from taking back over.
Planning Something Similar?
See our brush and land clearing and Clatskanie land services, read how to clear blackberries for good, or request an estimate and we'll take a look at your property.
← All success stories
