The Problem
These clients had just purchased this property in North Plains. It had been abandoned and neglected, and they were beginning renovations.
Before work could move forward, they needed a solid area to park vehicles and equipment, along with a clean space to work.
BeforeClearing and Stripping the Area
I removed all of the brush and debris, then stripped the area so the new gravel would sit on firm ground. Grass, roots and soft topsoil left beneath gravel cause a pad to settle and turn muddy over time.
Installing the Gravel Pad
With the ground prepared, we installed a gravel pad across the entire area, creating a large, solid space for parking and work.
The Result
The clients now have a large gravel parking area with room for their vehicles and equipment, and a clean place to work as they restore the rest of the property.
AfterWhat a Project Like This Costs
Typical range
Under $5,000
Brush clearing and simple gravel pad jobs like this one usually fall in this range.
What affects the cost
Every property is different, so the cost of similar projects can vary. The main factors are:
- Haul distance. The distance between the quarry supplying the material and the job site.
- Material pricing. Rock prices vary by quarry and by material type.
- Project size and depth. The size of the pad and the depth of rock required determine the total amount of material.
- Site access. Narrow entrances, slopes or soft ground can require smaller loads or additional trips.
- Site preparation. Clearing brush, removing debris and stripping the area before the gravel is placed.
- Ground conditions. Soft or wet subsoil may require a thicker base layer.
Planning a similar project? We're happy to talk through what you have in mind and give you a free estimate.
Common Questions
Why strip an area before installing a gravel pad?
Grass, roots and topsoil are soft and hold water. Stripping them first lets the gravel sit on firm ground, so the pad stays solid instead of sinking or turning to mud.
What is a gravel pad used for?
A gravel pad gives you a solid, mud-free surface for parking vehicles and equipment, staging materials during a project, or a clean place to work, especially on rural and acreage properties.
Can you clear brush and install gravel in the same job?
Yes. On jobs like this one, we clear the brush and debris, strip the area and install the gravel, so the space goes from overgrown to usable in one project.
Planning Something Similar?
See our gravel pads, North Plains land clearing, North Plains site preparation and North Plains gravel delivery, or request an estimate and we'll take a look at your property.
← All success stories