The Problem
A Christmas tree farm in North Plains contacted us about restoring the gravel roads throughout the farm.
The roads still had material on them but needed to be regraded. There were low spots, ruts and potholes, and some sections had begun to hold water.
Restoring the Roads Without New Gravel
We were able to restore these roads without bringing in any additional gravel.
We used our soil conditioner, a skid steer attachment with a rotating drum, to break up the surface and bring the existing gravel back to the top. As we worked, we cut out the defects and left a smooth, even road surface. We completed this across several miles of road throughout the farm.

Why the Gravel Looks Brown
The finished roads have a slightly brown appearance because pine needles had accumulated on the surface and were mixed in as it was reworked. The rock remains in place underneath, and the roads are smooth again.
The Result
The farm now has several miles of smooth gravel roads, with the low spots, ruts and potholes eliminated. By reusing the gravel already in place, the farm saved thousands of dollars compared to resurfacing with new gravel.
AfterEquipment Used
A compact track loader with a soil conditioner attachment. No new gravel was needed.
What a Project Like This Costs
Typical range
Under $5,000
Regrading jobs like this one, restoring several miles of existing gravel road without new material, usually fall in this range.
What affects the cost
Every property is different, so the cost of similar projects can vary. The main factors are:
- Length of road. More miles of road take more time to regrade.
- Condition of the road. Deeper ruts and potholes take more passes to fix.
- Existing gravel. If enough good rock is left in the road, regrading can avoid the cost of new material.
- Site access. Narrow roads, trees and slopes can slow equipment down.
- Ground conditions. Wet or soft sections can take more work to get smooth.
Planning a similar project? We're happy to talk through what you have in mind and give you a free estimate.
Common Questions
Can you fix a gravel road without adding new gravel?
Often, yes. If the road still has good rock in it, a soil conditioner can break up the surface, bring the existing gravel back up to the top, cut out ruts and potholes, and regrade it smooth. That can save thousands of dollars compared to bringing in fresh gravel.
What causes ruts and potholes on farm roads?
Low spots hold water, and traffic pushes the softened surface down and out of place. Over time the gravel works down into the road and gets covered by debris like pine needles, leaving ruts and potholes on top.
When does a gravel road need fresh gravel instead?
If most of the rock is gone or has worked too deep into the road, regrading alone won't be enough. On a site visit, we check how much usable gravel is still in the road before recommending new material.
Planning Something Similar?
See our gravel driveway and road repair, North Plains gravel driveway repair and North Plains land services, or request an estimate and we'll take a look at your property.
← All success stories