The Problem
These clients contacted us to expand their driveway and parking area.
The area they wanted to expand into was on a slope, so it had to be built up to meet the existing driveway.
BeforeBuilding Up the Base
We used 3" minus base rock to build up the area and create a solid foundation. The fill was placed in layers, with each layer compacted.
Matching the Existing Grade
We finished the parking addition with 3/4" minus and matched it to the existing parking area and the area in front of the shop, so the entire surface sits at a consistent grade.
A Riprap Edge
Because the pad was built up, we installed 2" to 8" riprap along the edge. It provides a solid, clean border and helps control erosion.


A Fresh Coat for the Whole Driveway
The clients were so pleased with the new parking area that they had us apply a fresh coat of 3/4" minus to the rest of the driveway and parking area, so everything has a clean, consistent appearance.

The Result
The clients now have a much larger, solid parking area that matches the rest of the driveway, with a clean riprap edge holding it in place.
AfterMaterials Used
3" minus base rock to build up the slope, 3/4" minus gravel over the expansion and a fresh coat over the existing driveway and parking, and 2" to 8" riprap along the built-up edge, all placed in compacted layers.
What a Project Like This Costs
Typical range
$10,000 – $20,000
Driveway and parking expansions like this one, built up on a slope with a riprap edge and a fresh top coat, usually fall in this range.
What affects the cost
Every property is different, so the cost of similar projects can vary. The main factors are:
- Haul distance. The distance between the quarry supplying the material and the job site.
- Material pricing. Rock prices vary by quarry and by material type.
- Slope and fill depth. The steeper the slope, the more rock it takes to build the area up.
- Edging. Riprap or other edging along built-up sides adds material and time.
- Recoating existing areas. Adding a fresh top coat over existing driveways and parking adds material.
Planning a similar project? We're happy to talk through what you have in mind and give you a free estimate.
Common Questions
How do you build a gravel parking area on a slope?
Build it up in layers. A base of 3" minus gives the built-up area a solid foundation, then 3/4" minus goes on top, with each layer compacted. The finished surface is set to match the grade of the existing driveway and parking.
Why put riprap around the edge of a gravel pad?
When a pad is built up above the surrounding ground, its edges can slough off and erode. A border of 2" to 8" riprap holds the edge in place, helps control erosion and gives the pad a clean, finished look.
Can new gravel match an existing driveway?
Yes. On this job we matched the new parking area to the grade of the existing parking and the area in front of the shop, then added a fresh coat of 3/4" minus over the rest of the driveway so everything blends together.
Planning Something Similar?
See our gravel pads and parking areas, Deer Island land services and Deer Island gravel delivery, or request an estimate and we'll take a look at your property.
← All success stories
