Success Story•Banks, OR

Drainage Swale Repair with Riprap in Banks, Oregon

By Curtis Miller, Owner · Excavation, land services & gravel delivery in Northwest Oregon

Drainage swale fully lined with new 2 to 8 inch riprap rock along a row of evergreen trees in Banks, Oregon

Quick summary

This drainage swale in Banks, Oregon, was about 20 years old, and its eroded edges were caving in. We sloped back the edges, removed the loose debris, and lined the entire swale and its new edges with 2 to 8 inch riprap to prevent future erosion.

Location
Banks, OR (Washington County)
Project Price Range
Under $5,000

The Project

This drainage swale was about 20 years old and in need of restoration. Its edges had eroded and were caving into the channel.

Old rock-lined drainage swale with eroded, caving edges before repair in Banks, OregonBefore
Eroded edges caving into the swale.

Sloping Back the Edges

We sloped back all of the soil edges and removed the loose debris. The excavated soil was placed elsewhere on the property, so nothing needed to be hauled away.

Mini excavator sloping back the eroded edges of a drainage swale in Banks, Oregon
Sloping back the edges and pulling out loose debris.

Lining It with Riprap

We then brought in several truckloads of 2 to 8 inch riprap and lined the entire swale, including the newly shaped edges, to prevent future erosion.

The Result

The swale is functioning as intended, and the clients are very pleased with the result.

Materials Used

Several truckloads of 2 to 8 inch riprap, lining the full swale and its edges.

What a Project Like This Costs

Typical range

Under $5,000

Swale repairs like this one, with the edges sloped back and the swale lined with riprap, usually fall in this range.

What affects the cost

Every property is different, so the cost of similar projects can vary. The main factors are:

  • Swale length and width. The size of the swale determines how much rock it takes to line it.
  • Condition of the edges. How much erosion needs to be sloped back and cleaned out first.
  • Haul distance. The distance between the quarry supplying the rock and the job site.
  • Material pricing. Rock prices vary by quarry and by material type.
  • Site access. Trees, slopes and soft ground can limit equipment and truck access.

Planning a similar project? We're happy to talk through what you have in mind and give you a free estimate.

Common Questions

Why do the edges of a drainage swale erode?

Water running through the swale wears away bare soil along the edges over time. The soil starts caving in, which narrows the channel and adds loose material to the swale.

What size rock is best for lining a drainage swale?

We used 2 to 8 inch riprap. The large, angular rock locks together and holds up against moving water, protecting the soil underneath.

How do you repair an eroded drainage swale?

Slope back the eroded edges, pull out the loose debris, then line the swale and the fresh edges with riprap so the soil is protected from future erosion.

Planning Something Similar?

See our drainage solutions, Banks excavation, our guide to French drains vs. swales vs. dry creek beds and our 2 to 8 inch riprap, or request an estimate and we'll take a look at your property.

← All success stories

Have a similar project?

Planning a Project in Banks?

Whether it's a parking lot, a building pad or a driveway, we'll walk your site and give you a clear estimate. Request an estimate, or call or text us today.

★ 5.0 Google Rating  ·  Licensed, Bonded & Insured  ·  Local & Family-Run

Graded backyard beside a new home and fence in Hillsboro, Oregon

★★★★★

5.0 on Google

Call Us Request Estimate