The Project
This client's shop sits on the far side of his property. A narrow, carved-out trail wrapped around the property toward it, but it could not be driven.
The only other route to the shop crossed a creek on a bridge that was failing. He asked us to build a solid, budget-friendly access road to the shop.
Before
BeforeStripping the Route
We removed as much of the vegetation and topsoil along the route as possible. Topsoil is soft and holds water, so removing it gives the rock a firmer surface to sit on and helps the road resist ruts and soft spots.
Building the Road
We built about 1,500 feet of new road, starting at the existing driveway, wrapping around the property and looping in front of the shop for easy access.
We placed 3" minus as the base rock to provide strength over the ground below, then topped the entire road with 3/4" minus. The road was graded and compacted for a smooth, solid finish.


The Result
The client now has reliable, drivable access to his shop without depending on the failing bridge.
After
After
AfterMaterials Used
3" minus base rock topped with 3/4" minus, graded and compacted along about 1,500 feet of new road.
What a Project Like This Costs
Typical range
$10,000 – $20,000
Access roads like this one, about 1,500 feet long with a 3" minus base and a 3/4" minus top layer, typically fall within this range.
What affects the cost
Every property is different, so the cost of similar projects can vary. The main factors are:
- Road length and width. The size of the road determines the total amount of rock required.
- Ground conditions. How much vegetation and topsoil needs to be stripped, and how soft the ground is underneath.
- Haul distance. The distance between the quarry supplying the rock and the job site.
- Material pricing. Rock prices vary by quarry and by material type.
- Site access. Trees, slopes and tight turns can limit equipment and truck access.
Planning a similar project? We're happy to talk through what you have in mind and give you a free estimate.
Common Questions
What rock should be used to build a gravel access road?
A 3" minus base provides strength and spreads vehicle weight over the ground below. A top layer of 3/4" minus then compacts into a smooth, firm driving surface.
Why remove topsoil before building a gravel road?
Topsoil is soft and holds water. Left under the rock, it leads to ruts, soft spots and settling, so stripping it gives the road a firmer foundation.
How can a gravel access road be built on a budget?
Following an existing route where possible and sizing the road to how it will actually be used keeps grading and material costs in check, while a proper base and a compacted top layer keep it solid.
Planning Something Similar?
See our site preparation, Rainier site preparation and Rainier gravel delivery, or request an estimate and we will evaluate your property.
← All success stories