The Project
These clients were ready for a quality gravel driveway. Their existing driveway was not in poor condition, but it had begun to hold water, and they also wanted to expand the parking area in front of their house.
They asked us to resurface the driveway properly, expand the parking area and have everything blend together.

BeforeRegrading the Driveway
We began by grading the driveway and cutting out all of the potholes, ruts and defects. Removing these defects, rather than covering them, gives the new gravel an even surface and keeps water from collecting in the same places.
Preparing the Parking Expansion
At the parking area, we stripped the topsoil and debris from the section being expanded. All excavated material was hauled off site and disposed of.

Installing 3/4" Minus
We then installed and graded about 6 inches of 3/4" minus over the entire driveway and the existing parking area.

After
AfterBuilding the New Parking Area
The soil in the expansion area was somewhat soft, so we placed a base layer of 1-1/2" minus first. We then topped it with 3/4" minus to match the existing driveway, blending the new section in so seamlessly that you cannot tell it was added.
AfterThe Result
The clients were very pleased. The project turned out well and completely changed the look of their property.
We had an excellent experience working with Curtis on resurfacing our gravel driveway. We'd definitely use this service again. … He was very professional, provided helpful tips for how to approach our project, and delivered fantastic results. Highly recommended!
Materials Used
About 6 inches of 3/4" minus over the driveway and existing parking area, and a 1-1/2" minus base topped with 3/4" minus in the new parking area, graded and compacted.
What a Project Like This Costs
Typical range
$10,000 – $20,000
Driveway resurfacing projects like this one, with about 6 inches of new 3/4" minus and a parking area expansion, typically fall within this range.
What affects the cost
Every property is different, so the cost of similar projects can vary. The main factors are:
- Driveway size. The length and width of the driveway and parking areas.
- Depth of new rock. How much gravel is needed to resurface and build up the surface.
- Ground conditions. Soft soil may require a stronger base rock in new areas.
- Haul distance. The distance between the quarry supplying the rock and the job site.
- Material pricing. Rock prices vary by quarry and by material type.
Planning a similar project? We're happy to talk through what you have in mind and give you a free estimate.
Common Questions
When should a gravel driveway be resurfaced?
When a gravel driveway starts holding water, developing potholes or ruts, or losing its rock, it is time to resurface. Addressing it before the base breaks down keeps the repair simpler.
Why use a 1-1/2" minus base under a parking area?
Larger 1-1/2" minus spreads weight and bridges soft soil better than smaller gravel, giving the 3/4" minus top layer a stable foundation.
How do you make a parking expansion match an existing driveway?
Finish the new area with the same top rock as the existing driveway and grade the two to the same level, so the transition is seamless.
Planning Something Similar?
See our gravel driveway repair, Warren excavation and Warren gravel delivery, or request an estimate and we will evaluate your property.
← All success stories
