The Project
These clients own about 80 acres and plan to build a new home on the property. They are not in a rush and are taking the project one step at a time.
The first step was access: a driveway leading up the hillside to where the new house will sit.
Cutting In the Road
We cut in about 1,200 feet of new road along a steep embankment, running straight up the hillside to the future home site. The road is 18 feet wide, giving plenty of room for construction traffic now and everyday use later.


A Light Layer of Rock for Now
For now, the road will get a light layer of rock so it stays passable and does not turn into a muddy mess while the rest of the project comes together.
What Comes Next
This project is still in progress. The next step is running utilities up the road. Once the utilities are installed, we will rock the entire road, starting with 3" minus base rock and working up to 3/4" minus on top.
Installing utilities before the full rock section goes down means the finished driveway will not need to be dug up later.
How Much Rock a New Driveway Takes
To build a brand-new driveway like this one to county specifications, it usually takes six to seven 15-ton dump truck loads of rock for every 100 feet, depending on the width and soil conditions. There are many variables, but that gives a general idea of the material involved.
Materials Planned
A light layer of rock for temporary access, followed by 3" minus base rock and a 3/4" minus top layer once utilities are in.
What a Project Like This Costs
Typical range
$50,000+
New road installations like this one, cut into a hillside and built up with base rock and a 3/4" minus top layer, usually run $50,000 or more.
What affects the cost
Every property is different, so the cost of similar projects can vary. The main factors are:
- Road length and width. Longer and wider roads require more excavation and more rock.
- Slope. Steep ground requires more cutting and shaping to reach a drivable grade.
- Soil conditions. Soft soil can require a heavier base section.
- Haul distance. The distance between the quarry supplying the rock and the job site.
- Material pricing. Rock prices vary by quarry and by material type.
Planning a similar project? We're happy to talk through what you have in mind and give you a free estimate.
Common Questions
How much rock does a new gravel driveway need?
As a general guide, a brand-new driveway built to county specifications usually takes six to seven 15-ton dump truck loads of rock for every 100 feet, depending on the width and soil conditions.
Why build a new driveway in phases?
Building in phases makes the road usable right away with a light layer of rock, lets utilities go in before the final rock section, and spreads the work out for owners who are not in a rush to build.
Why install utilities before rocking a new driveway?
Running utility lines along the road before the full rock section goes down avoids digging through a finished driveway later. The road gets a light layer of rock first so it stays passable in the meantime.
How wide should a rural driveway be?
It depends on the property and local requirements. This driveway was cut 18 feet wide to give comfortable room for construction traffic and everyday use up to the home site.
Planning Something Similar?
See our site preparation, Rainier site preparation and Rainier gravel delivery, along with a similar project on a steep lot: site preparation for a new home in North Plains. You can also request an estimate and we will evaluate your property.
← All success stories
